ATOMSTACK Laser Engraver S10 Pro DIY Engraver Machine for Metal Wood

(8 customer reviews)


Free shipping on orders over $50!

  • Check Mark Satisfaction Guaranteed
  • Check Mark No Hassle Refunds
  • Check Mark Secure Payments
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal


10W Fixed-Focus Compressed Spot Power CNC Laser Cutter Engraving Machine

ATOMSTACK S10 Pro laser engraver with 50W machine power and 10W laser output power, ultra-fine laser focus area is reduced to 0.08*0.06mm, high-density laser can cut 15~20mm thick wood, engrave mirror, stainless steel metal, ceramics, glass, cutting speed is 40% higher than the ordinary model.

Support Offline Engraving

S10 PRO laser engraving machine configures the terminal control panel, supports offline engraving and with emergency stop button, after you install the software and upload the file, you can carry out engraving work anytime and anywhere without being restricted by the computer.

High-Performance Fixed-Focus Laser

No need to adjust the focus before engraving; The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers. Automatic fixed focus, new laser combine precision engraving and high energy cutting at the same time.

New Filter Panoramic Glass Eye Protection Design

S10 laser engraving with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles and can watch the engraving clear. Reduce the cost of your goggles and more convenience.

Compatible With

The newest ATOMSTACK S10 Pro engraving machine is compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(may need paid), support Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11, and support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

How to choose an engraving machine?

20w/40w/50w/60w/90w is the higher the better number? How should I choose?

In fact, 20w/40w/50w/60w/90w is only the output power of the machine, not the key to determining the engraving/cutting effect. The output power of the laser module is the key point. If the output power of an engraving machine is 90W, and the output power of the laser module is 5~5.5w, that effect is not much different from that of a machine with a 40W output power and 5~5.5w laser module output power.

The laser modules 5W is suitable for people who do DIY and a few cutting workers at home. 10W is a more professional machine for engraving and cutting, suitable for engraving/cutting enthusiasts and people who often need to use an engraving machine.

Notes of using

● Screen blank causes the emergency stop button to be pressed, turn the emergency stop button clockwise to start the screen, and it can use all functions directly without connecting to WiFi.

● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.

● Please do not touch the laser emitter with your hand, or it may burn your hand.

● Please avoid a strong impact on the machine.

● Children under 14 are not allowed to use this product and children over 14 need parent supervision.

● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

Item Model Number: ATOMSTACK S10 PRO

Print Size: Recommend Print Size 410*400mm
Laser power: 50W
Laser output power: 10-11W
Wave Length: 445 ± 5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no need to focus
Laser protective cover: Protect the user’s eyes and prevent pets from grabbing the laser spot.
Operating software: LaserGRBL, LightBurn(paid), support Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11 system, Mac OS and Linux.
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Data transmission method: USB connection.
Input Voltage: AC100-240 V, 50/60Hz
Output Voltage: DC12V, 5A
Reset switch: Yes
Stopper: Yes
Cutting Objects: Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge;
Carving Objects: Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;

8 reviews for ATOMSTACK Laser Engraver S10 Pro DIY Engraver Machine for Metal Wood

1-8 of 8 reviews
  1. Very powerful, capable and easy to use!

  2. Love my new Laser Etcher/Cutter!!!

  3. Fantastic and fun addition to my workshop

  4. Good for hobby projects. Works well with solid text engraving.

  5. Quality is OK

  6. Nice, affordable engraver

  7. Cool Laser Engraver for Beginners

  8. great peice of equipment, once you figure out how to use it.

Only logged in customers who have purchased this product may leave a review.